Part Number Hot Search : 
AP422 S100R 333ML SG352 100100 FOD8143S P6SMB130 51161
Product Description
Full Text Search
 

To Download SUF-1000 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Preliminary
SUF-1000
Product Description
Sirenza Microdevices' SUF-1000 is a monolithically matched high IP3 broadband pHEMT MMIC amplifier. The self-biased direct-coupled topology provides exceptional cascadable performance from DC-20 GHz. Its efficient operation from a single 5V supply and its compact size (0.88 x 0.75 mm2) make it ideal for high-density multi-chip module applications. It is well-suited for wideband instrumentation and directconversion systems.
Gain & Return Loss vs. Frequency (GSG Probe Data)
12 GAIN 10 8 Gain (dB) 6 ORL 4 IRL 2 0 0 2 4 6 8 10 12 14 16 18 20 Fre que ncy (Ghz) -25 -30 \ -20 -5 -10 -15 Return Loss (dB) 0
DC-20 GHz, Cascadable pHEMT MMIC Amplifier
Product Features
* * * * * * * Broadband Flat Gain = 10 dB P1dB = 14 dBm Direct-coupled topology Efficient single-supply operation: 5V, 45mA Low Gain Variation vs. Temperature Compact die size (0.75 x 0.88 mm2) Patented Self-Bias Darlington
Applications
* * * * *
Ultra-Broadband Communications Test Instrumentation Military & Space LO and IF Mixer Applications Replaces traditional dual-supply distributed amplifers
Symbol
Parameters
Units
Frequency
Min.
Typ.
Max.
10.5 10.5 9.0 14.0 P1dB Output Power at 1dB Compression dBm 14.0 14.0 26.0 OIP3 Output Third Order Intercept Point dBm 26.0 25.5 4.5 NF Noise Figure dB 4.5 5.0 -37.0 IRL Input Return Loss dB -20.5 -11.5 -21.5 ORL Output Return Loss dB -17.5 -11.0 -21.0 Isol Reverse Isolation dB -17.5 -17.0 VD Device Operating Voltage V 3.4 ID Device Operating Current mA 46 Gain Variation vs.Temperature dB/C -0.01 G/T Rth, j-l Thermal Resistance (junction to backside) C/W 262 VS = 5 V ID = 80 mA Typ. OIP3 Tone Spacing = 1 MHz, Pout per tone = 0 dBm Test Conditions: Test Conditions: VS = 5.0V, Rbias=35 Ohms, ID = 46mA, OIP3 Tone Spacing = 1MHz, Pout per tone = 0 dBm TL = 25C ZS = ZL = 50 Ohms Measured with Bias Tees Gp Small Signal Power Gain dB
ZS = ZL = 50 Ohms, 25C, GSG Probe Data With Bias Tees
The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or omissions. Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product for use in life-support devices and/or systems. Copyright 2001 Sirenza Microdevices, Inc.. All worldwide rights reserved.
2 GHz 6 GHz 16 GHz 2 GHz 6 GHz 16 GHz 2 GHz 6 GHz 16 GHz 2 GHz 6 GHz 16 GHz 2 GHz 6 GHz 16 GHz 2 GHz 6 GHz 16 GHz 2 GHz 6 GHz 16 GHz
303 S. Technology Ct. Broomfield, CO 80021
Phone: (800) SMI-MMIC 1
http://www.sirenza.com
EDS-105415 Rev A
Preliminary SUF-1000 DC-20 GHz Cascadable MMIC Amplifier
Typical Performance (GSG Probe Data)
S21 vs. Frequency
12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 18 20 Fre que ncy (GHz) 0C 25C 85C
dBm 15 14 13 12 11
P1dB vs. Frequency
dB
10 9 8 7 6 5 0 2 4 6 8 10 12 14 16 18 Fre que ncy (GHz) 25C -20C 85C
S11 vs. Frequency
0 -5 -10 dB -15 0C -20 -25 -30 0 2 4 6 8 10 12 14 16 18 20 Fre que ncy (GHz) 25C 85C
S22 vs. Frequency
0 -5 -10 dB -15 -20 -25 -30 0 2 4 6 8 10 12 14 16 18 20 Fre que ncy (GHz) 0C 25C 85C
OIP3 vs. Frequency
30 -20C 25C 85C 26 dBm
dB 7 6 5 4 3 2
Nois e Figure vs . Fre que ncy
28
24
25C -20C 85C
22
1
20 0 2 4 6 8 10 12 14 16 18 Fre que ncy (GHz)
0 0 2 4 6 8 10 12 14 16 18 Fre que ncy (GHz)
303 S. Technology Ct. Broomfield, CO 80021
Phone: (800) SMI-MMIC 2
http://www.sirenza.com
EDS-105415 Rev A
Preliminary SUF-1000 DC-20 GHz Cascadable MMIC Amplifier Typical Performance (GSG Probe Data)
Freq (GHz) 0.1 0.5 0.85 2 4 6 10 16 Test Conditions: 20 VD (V) 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 Current (mA) 46 46 46 46 46 46 46 46 46 Gain (dB) 10.4 10.4 10.4 10.4 10.5 10.5 10.3 9.0 7.6 P1dB (dBm) OIP3 (dBm) S11 (dB) -34.0 -36.0 -37.0 -34.0 -26.0 -20.0 -14.0 -12.0 -13.0 S22 (dB) -21.0 -22.0 -22.0 -21.0 -19.0 -17.0 -14.0 -11.0 -10.0 NF (dB)
13.0 14.0 13.5 14.0 14.0 14.0
24.5 26.0 26.0 26.0 25.0 25.5
4.4 4.4 4.4 4.6 4.7 5.1 5.1
Test Conditions: GSG Probe Data With Bias Tees, Rbias = 35 Ohms OIP3 Tone Spacing = 1MHz, Pout per tone = 0 dBm, 25C
Parameter
Max Device Current (ID) Max Device Voltage (VD) Max RF Input Power
Absolute Limit
70mA 4V 10dBm
Max Dissipated Power
Max Junction Temperature (TJ) Operating Temperature Range (TL) Max Storage Temp.
280mW
150C -40 to +85C -65 to +150C
Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the following expression: TL=Backside of die IDVD < (TJ - TL) / RTH, j-l
Current Variation vs. Temperature
Current vs. Voltage
55 50 45 40 mA 35 30 25 20 4.75 -20C 25C 85C
ELECTROSTATIC SENSITIVE DEVICE Appropriate precautions in handling, packaging and testing devices must be observed.
4.80
4.85
4.90
4.95
5.00 VD
5.05
5.10
5.15
5.20
5.25
303 S. Technology Ct. Broomfield, CO 80021
Phone: (800) SMI-MMIC 3
http://www.sirenza.com
EDS-105415 Rev A
Preliminary SUF-1000 DC-20 GHz Cascadable MMIC Amplifier
Pad Description
1
2
Pad #
Function
Description
1 2 Die Bottom
This pad is DC coupled and matched to 50 Ohms. An external DC block is required. This pad is DC coupled and matched to 50 Ohms. RFOUT / Bias Bias is applied through this pad. RFIN GND Die bottom must be connected to RF/DC ground using silver-filled conductive epoxy.
Notes: 1. All Dimensions in Inches [Millimeters]. 2. No connection required for unlabeled bond pads. 3. Die Thickness is 0.004 (0.100). 4. Typical bond pad is 0.004 (0.100) square. 5. Backside metalization: Gold. 6. Backside is Ground. 7. Bond pad metalization: Gold.
Device Assembly
35 Interconnect Wire or Ribbon Bypass Cap(s)
Choke
50 Line
DC Block 50 Line
DC Block
3-5 mil gap
303 S. Technology Ct. Broomfield, CO 80021
Phone: (800) SMI-MMIC 4
http://www.sirenza.com
EDS-105415 Rev A


▲Up To Search▲   

 
Price & Availability of SUF-1000

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X